Phishing attempt perhaps or just plain spam from China delivered with sender of Chris.Wu
———————
Dear Customer,
I would like to announce a great offer for Plating chemistry Formula. All those process acquired from the retired staff of the company. It is an opportunity to shorten your R&D time and cost down.
You can refer to the following list , and let me know which product process interest you.
Thank you in advance and should my services satisfy you, we look forward to working with you.
Product Brochure
Pre-treatment
1. Dry acid salt for pickling and activating metals
A crystalline, acidic, fluoride-containing compound used for etching aluminum, rapid removal of siliceous films from steel, pickling of titanium, stainless steel and magnesium alloys, and etching of glass and sand removal.
2. Dry acid salt
This non-foaming activator will produce a smut-free, active metal surface on steel, zinc, brass, copper, nickel, aluminum, pewter, Kovar and Invar.
3. Dry acid salt
A dry powder used in an acid solution to activate passive nickel, ferro-nickel and ferro-nickel deposits prior to chromium plating. It may also be used to activate stainless steel prior to chromium plating.
4. Dry acid salt
Nickel activate for AL wheel.
5. Desmutting Aluminum
For AL Wheel
6. Nitric Acid conditioner
A liquid concentrate, which is added to nitric acid. The solution mixture is used to strip zinc immersion coatings from aluminum.
7. Quality assured mild acidic etch for plating on Aluminum
A Quality Assured (QA), specially filtered (1 m? nominal), acidic liquid concentrate for use in the pre-treatment cycle of aluminum alloys prior to electroless nickel plating.
8. Activating salt containing fluoride
A salt contain fluoride, which reacts acidic in aqueous solutions, and is used for making-up activating solutions copper, copper alloys, zinc die-casts, and steel.
9. Soak and ultrasonic cleaner for colored metals and Al alloys
A mildly alkaline immersion cleaner with good emulsifying characteristics, for the cleaning of copper and aluminium and their alloys colored metals will hardly discolor and to be attached.
10. Alkaline degreasing bath for steel and colored metals
An alkaline salt mixture, which contains silicate, for making-up both electrolytic degreasing solution- in combination with suitable emulsifiers-and hot degreasing solutions with good dispersing properties.
11. Non-Si soak cleaner for Al alloys
Ideal for the non-etch cleaning of aluminum prior to anodizing, chemical milling, chromating, bright dipping, electroless plating and electroplating.
12. Non-Si soak cleaner for plating EN on AL
A high detergent, quality assured grade, specially filtered one mu nominal), mild alkaline non-etch soak cleaner for aluminum.
13. Alkaline soak cleaner
A phosphate-free surface conditioner for use in dispersing, emulsifying, and saponifying a wide variety of mineral and organic soils on all common metals except magnesium.
14. Non scaling alkaline etch cleaner for AL
An alkaline cleaner added to water to produce an etching and cleaning solution for a wide variety of aluminum alloys.
15. Dilute zincate for plating EN on AL
A cyanide-free dilute Zincate process that is especially designed for plating electro-less nickel on aluminum alloys.
16. Zincate solution for AL
Consistently produces uniform, fine-grained zinc deposits with a minimum of etching on the aluminum surface.
17. NON-P ALKALINE CLEANER
Specially for plating zinc, also for steel, brass, copper. High-efficiency, not contain P.
18. CLEANER FOR STEEL
Non-P, electrolytic degreasing for steel.
19. CHEMICAL CLEANER FOR STEEL
Chrome Plating
20. Low foam wetting agent for CR plating
A low-foaming wetting agent added to chromium plating solutions to prevent spray formation during plating by reducing the surface tension of the solution.
21. Bright chromium plating
A bright decorative chromium plating process based on a mixed-acid chrome electrolyte. It is formulated to provide excellent covering power within a wide range of operating current densities.
22. Hard chromium plating
A non-fluoride, process for rapid deposition of hard chromium. Its field of application is very wide, ranging from hydraulic components, wear and tear motor articles, down to printing rollers.
23. Electrolytic Activator for Bright Ni
An electrolytic (cathodic) activator for electroplated bright nickel deposits plated prior to bright chromium plating. It replaces electroless activation in chromic acid.
24. Trivalent chromium process
A unique trivalent chromium plating process which is used to deposit a bright chromium layer over bright nickel or nickel-iron deposits.
Nickel Plating
25. BRIGHT NICKEL for racking
A multiple additive, bright nickel process designed to produce superior leveling and brightness using either air agitation or cathode rod agitation. The process is suitable for rack plating of steel, brass, and copper plated components.
26. BRIGHT NICKEL for racking
A multiple additive, bright nickel process designed to produce highly brilliant, consistently ductile nickel deposits. The process exhibits excellent leveling and throwing power using either air agitation or cathode rod agitation. The process is suitable for rack plating of steel, brass, and copper plated components
27. BRIGHT NICKEL for racking
A multiple additive, bright nickel process designed to produce superior leveling and brightness using air agitation. It is suitable for rack plating of steel, brass, and copper plated components.
28. Noble metal initiator prior to electroless nickel plating on copper
An acidic initiator used on non-catalytic copper surfaces prior to processing in electro-less nickel.
29. CLASSIC BRIGHT NICKEL
A multiple additive, bright nickel process designed to produce superior leveling and brightness using air agitation. It is suitable for rack plating of steel, brass, and copper plated components.
30. SEMI-BRIGHT NICKEL PLATING
produces extremely ductile sulfur-free, semi-bright nickel deposits having very low stress and extremely clean, bright, low current density areas.
31. SEMI BRIGHT NICKEL
produces extremely ductile sulfur-free, Semi-bright nickel deposits having very low stress and extremely clean, bright, low current density areas. particularly suitable for complex plastic and zinc-based die casting plating applications.
32. PEARLBRITE NICKEL
Electrolytic nickel rack plating processes produces uniform, lustrous satin nickel finishes on steel, copper, and copper alloys. Finishes range from micro crystalline satin to a full matte satin.
33. Service tool for nickel electroplating solutions
Prevents gas pitting in nickel electroplating solutions.
34. Air agitated nickel sulfate electroplating processes
Used to maintain a semi-bright low stress electroplated nickel deposit. The process is used with soluble anodes and sulfate chemistry in an air agitated plating cell.
35. NICKEL ADDITIVED D-SPEC
A dispersant which is recommended for use in bright nickel processes to correct persistent fine speckling or pitting problems.
36. Bright nickel process
Bright nickel process produces full, bright deposits with excellent ductility and leveling at low cost. This process contains no ozone depleting chemicals.
37. SEMI-BRIGHT NICKEL
Provides an initial semi-bright deposit when duplex nickel plating. Deposits are virtually sulfur-free, well levelled, and very ductile. It is suitable for use with cathodic or air agitation.
Electroless Nickel
38. High phosphorus, electroless nickel
An advanced electroless nickel process designed to produce deposits exhibiting superior performance in many engineering and functional applications. The carefully selected solution additives provide good solution stability and a moderate plating rate and produce a deposit with minimal or no porosity on properly prepared surfaces.
39. High speed, stable, bright electroless nickel process
a high speed, stable, bright electroless nickel process with a low to medium phosphorus content (5 to 7% by weight). It combines a fast plating rate and superior brightness needed for production applications with excellent as plated hardness and wear resistance needed for ngineering applications.
40. Semi-bright electroless nickel for high-corrosion resistance applications
A moderate speed, semi-bright electroless nickel process. The careful selection of solution additives including the lack of lead and cadmium-containing addition agents, a high phosphorus content and a moderate plating rate, produces a deposit with minimal or no porosity on properly prepared surfaces.
41. Electro-less nickel/barrier coating for aluminum
An electro-less nickel strike solution for processing aluminum prior to electroless nickel or electrolytic plating. This alkaline electroless nickel process produces a very thin, uniform, active nickel layer.
PALLAD PLATING
42. Neutral pure palladium process
A neutral pure palladium process with a white, mirror-bright deposition of up to a coating thickness of 0.3 µm.
43. Neutral pure palladium process
A neutral pure palladium process with a white, mirror-bright deposition of up to a coating thickness of 0.1 µm.
COPPER PLATING
44. Additive for Acid Cu
It can improve high current density appearance, combat deposit bum and replenish those components in the brightener system that more rapidly depleted by the use of auxiliary anodes.
45. Bright acid copper process
Bright acid copper process deposits a brilliant ductile copper with excellent leveling. It can be used as an undercoat for a variety of nickel-chromium combinations on steel, brass, aluminum, zinc die castings and plastics.
ALLOY PLATING
46. Yellow Bronze process ?CU-SN-Zn?
47. White Bronze process II (CU-SN)
48. White Bronze process III (CU-SN)
49. SN-CO process, Black
Tin alloy cobalt with an appearance similar to chromium. It can be used in applications of rack and barrel.
50. SN-NI process, gray
Alloy process of tin-plate-nickel with finished black and slight reddish tonalities. The process can be used in rack and barrel.
51. PALLAD-NICKEL process
52. PALLAD-COLBAT process
An alkaline Pd/Ni-process, that has a white, mirror-bright deposition capability of up to 10 µm coating thickness.
ZINC PLATING
53. Alkaline, non-cyanide zinc plating process for rack and barrel
An alkaline, non-cyanide zinc plating process displays unique properties which result in increased benefits to the user.
ZINC conversion coating
54. Liquid green chromate conversion coating for zinc
An concentrated liquid chromate, diluted only with water to produce a green chromate film on electroplated zinc.
55. Black conversion coating for zinc
An immersion process for producing a jet-black chromate conversion coating On zinc electroplate. It can be used on alkaline cyanide and non-cyanide zinc electroplate and chloride zinc deposits in virtually all types of plating equipment
56. Black, trivalent conversion coating for alkaline zinc-iron and zinc-cobalt alloys
It can Produces a black conversion coating on rack and barrel plated zinc-iron, zinc-cobalt or zinc-cobalt-iron deposits. Used in combination with ENSEAL sealants, the process is a direct replacement for hexavalent black chromates. Meets the ELV Directive to eliminate hexavalent chromates from corrosion resistant finishes.
57. Transparent,Iridescent Blue trivalent conversion coating
It can produces light colored passivate layers that are clear without clouds or staining. The room temperature process delivers more than 200 hours corrosion protection in neutral salt spray to white rust on rack-plated parts.
58. TRIVALENT BLUE CONVERSION
Blue Tri., A single component liquid trivalent blue conversion coating for maximum longevity.
59. TRIVALENT BLUE CONVERSION
Exceptional corrosion resistance. Well suited to meet automotive industry standards.
60. TRIVALENT BLUE PASSIVATE
A two-component trivalent blue conversion coating for maximum longevity and superior corrosion protection.
61. TRIVALENT YELLOW-IRIDESCENT PASSIVATE
Thick layer passivate possesses exceptionally high corrosion resistance. Suitable for producing a conversion coating on all zinc and most zinc alloy deposits.
GOLD PLATING
62. Cobalt hardened gold process
A cobalt hardened, acid gold electroplating process. The process produces bright deposits with excellent resistance to corrosion, oxidation, and wear.
63. ACID HARDENED GOLD
64. HIGH SPEED GOLD
Cobalt-hardened gold process provides exceptional distribution. Extremely stable and controllable deposit performances yields reproducible final product.
65. Neutral Gold
66. NEUTRAL GOLD SALT
Single component, Use as make-up and replenish and conducting salt
67. Neutral immersion gold process for copper and copper alloys
A neutral immersion gold process used to deposit 2 to 10 microinches of gold on copper and copper alloys. It is usually used for short term (two months shelf life) solderability protection of copper and copper alloys.
68. DECORATIVE GOLD-23K (1N14)
Bright acid gold plating processes bring added value to all jewellery creations-verything from charms to flat wear-to give them lasting beauty.
69. DECORATIVE GOLD PALE YELLOW (2N18)
Bright acid gold plating processes bring added value to all jewellery creations-verything from charms to flat wear-to give them lasting beauty.
70. HIGH SPEED,ACID GOLD
71. GOLD STRIKE PLATING PROCESS
An acid type, gold strike electroplating process that provides excellent bondability. It can be used for both rack and barrel plating.
72. Decorative gold electroplating process
An acid electroplating formulation that produces hard, mirror-bright, rich yellow decorative gold deposits of approximately 23.5 karat. It is adaptable for both rack and barrel plating. It is well-suited for a wide variety of decorative applications including jewelry, watch cases, watch bands, writing instruments, optical frames and other decorative items.
73. Decorative gold electroplating process, Also apply to PWB
74. Neutral immersion gold process for copper and copper alloys
A neutral immersion gold process used to deposit 2 to 10 microinches of gold on copper and copper alloys. It is usually used for short term (two months shelf life) solderability protection of copper and copper alloys.
75. Decorative gold electroplating process
An acid-type electroplating formulation that produces hard, mirror-bright gold deposits of 23 karat to any desired practical thickness. The process contains nickel and cobalt.
76. Decorative gold electroplating process
An acid-type electroplating formulation that produces hard, mirror-bright gold deposits of 22 karat to any desired practical thickness. The process contains nickel and indium.
PLATING ON PLASTICS
77. Accelerator for Plating on plastics
Used with sulfuric acid to remove excess tin from plastic surfaces following tin-palladium activation.
78. Activator for plating on plastics
A concentrated solution of palladium catalyst and stannous chloride dissolved in HCL.
79. Wetter Use in mixed chromic acid-sulfuric acid etching solutions
It decreases etch surface tension, thereby allowing the etch to uniformly attack the plastic surface and promotes rapid solution drainage from etched parts
80. Acid copper strike for plating on plastics
A acid copper strike is designed for use in plating on plastics cycles following either electroless copper plate or properly conditioned electroless nickel plate.
81. Chromic acid free etching of polymers for electroless plating
PWB CHEMICALS
82. HIGH SPEED ACID COPPER PLATING SOLUTION FOR PWB
An acid copper plating formula with unusually high throwing power, used for producing ductile, bright copper deposits.
83. Bright acid copper solution
A super throwing power solution which enables increased throwing power in high aspect through hole plating. It has minimal decomposition products which enables stable through hole plating for long periods.
84. Lead Free Compatible Organic Solderability Preservative
OSP process, high performance copper protective coatings for use on printed wiring boards.
85. Bonding promoter for the production of multi-layers (Horizontal)
A bonding promoter for inner-layers with extreme high copper loading(up to 50g/L).
86. Electroless copper plating solution for PWB
A highly stable, room temperature, electroless copper plating solution designed for flash-type PWB process.It deposit a bright pink color and facilitate inspection of through-holes after plating.
87. Neutralizer/glass etch for multilayer etch back / de-smear process
A high performance neutralizer for use in Etch back/ De-smear Process. It may be used alone as a neutralizer or with either
88. SUPER MIROETCH (H2SO4-H2O2)
89. Palladium catalystic process
90. HASL flux
A heat stable flux used in hot air leveling machines which coat PC boards with solder.
91. Flux Remover
remove post-soldering residues of water soluble fluxes.
92. No-Sludge Solder Stripper
A high-performance, single-step, nitric acid based, no-sludge solder stripper especially developed for the spray removal of tin and tin/lead alloys from printed wiring boards.
93. Defoamer
An alkaline based, non-si defoamer recommended for use in conveyorised spray machines with adversely affecting the equipment.
94. Micro-Etch
It brightens the Cu surface and ensures the optimum topography for subsequent silver. deposition.
OTHERS
95. CHROMATE CONVERSION COATING FOR ALUMINUM
A liquid material that is mixed with water to produce a chromate conversion coating for aluminum and aluminum alloys.
96. Solvent-free, anti-tarnish treatment for silver and silver electroplate
97. Solvent type, anti-tarnish treatment for silver and silver electroplate
98. BLACKENING PROCESS FOR ZINC AND ZINC ALLOYS
A method of applying a jet-black inorganic oxide finish to zinc surfaces including electroplated zinc, sheet zinc and zinc base die castings.
99. GOLD STRIPPER
100. Cyanide immersion stripper for removal of Au from Steel, nickel and Cu
A powdered materials mixed with water to make up a stripping solution to remove gold from steel, nickel, copper and copper alloys.
101. GOLD STRIPPER
102. Electroless Nickel stripper
103. NICKEL STRIPPER for steel and iron
104. SILVER STRIPPER,COPPER STRIPPER for nickel
105. Sulfate-based bright acid tin
Designed to produce extremely bright tin deposits from sulfate based plating solutions.
106. Stripper for rack
Yours Sincerely,
Chris Ng
———–
Remember, the email above is a phishing attempt designed to get your personal information, would you receive one like this, do not respond.
Hello:
I am interested in your formulas for decorative gold electroplating process.
Decorative gold electroplating process. Acid formulation that produces hard, mirror-bright, rich yellow decorative gold deposits of approximately 23.5 karat for decorative applications including jewelry, watch cases, watch bands, writing instruments, optical frames and other decorative items.
I need to know how to activate semi-bright or dull passivated nickel surfaces on steel prior to bright nickel plating. Also your multiple additive, bright nickel process to produce highly brilliant nickel deposits for rack plating of steel, brass, and copper plated components,
Thank You very much
Luis
sir
please send formula for making brightners(m and r) for zinc and nickel
Thanks..
Hi there.. Our company Marshal Laboratories Pvt Ltd has expertise on Precious Metal Plating with an under coat of White and Yellow Bronze. Looking for a partner to market our product or Franchise . Please contact
Hi
i am interesting in the mirror type high relative plating on any kind of material especially for glass, could you give me any advice?
Hello
I’m trying to make copper layer on SiO2/Si substrate.
But I don’t want to use PdCl2 as activator in electroless plating method.
How can I do without PdCl2 ? Pls help me.
Basically, I’m interested in the formulas of electroless copper plating without PdCl2 on glass layer. Can you give me the formulation?
Thanks
Mr Aye
pls suggest us regarding electroplating, Trivalent Black passivation and their other passivation interdediate chemicals.
Please let me know if you need the following:
Enthone Product Formula
Pre-treatment
1. Actane 70 (Dry acid salt for pickling and activating metals
2. Actane 345 (Dry acid salt)
3. Actane 380 (Dry acid salt)
4. Actane 382 (Nicke activate for AL wheel)
5. Actane 788 (Dessmut for AL Wheel)
6. Actane 2969 (Nitric Acid conditioner)
7. Actane 4322S (Quality assured mild acidic etch for plating on Aluminum)
8. Actane KT (Activating salt containing fluoride)
9. Enprep 2370 T (soak and ultrasonic cleaner for colored metals and Al alloys)
10. Enprep 1012 (Alkaline degreasing bath for steel and colored metals)
11. Enprep 35 (Non-Si soak cleaner for Al alloys)
12. Enprep 8744 (Non-Si soak cleaner for plating EN on AL)
13. Enprep 142 (Alkaline soak cleaner)
14. ENprep 14 (Non scaling alkaline etch cleaner for AL)
15. Alumon EN (Dilute zincate for plating EN on AL)
16. Udyfin 948 (Zincate solution for AL)
17. UDYPREP 283 (NON-P ALKALINE CLEANER)
18. UDYPREP 261 (CHEMICAL CLEANER FOR STEEL)
19. UDYPREP 101 CHEMICAL CLEANER FOR STEEL)
Chrome Plating
20. Ankor Wetting Agent SRK (Low foam for CR plating)
21. Ankor 1120H (Bright CR plating)
22. Ankor 1127 SR (Hard chromium plating)
23. Ankor NFDS (Activator for Bright Ni)
24. Tricrolyte IV (Trivalent chromium process)
Nickel Plating
25. ELPELYT LS 1(BRIGHT NICKEL)
26. ELPELYT GS 6 (Bright Nickel)
27. ELPELYT SF/PP (BRIGHT NICKEL)
28. ENPLATE INITIATOR 853(NOBLE METAL PRIOR TO EN ON CU)
29. CLASSIC BRIGHT NICKEL (FOR STEEL,BRASS,COPPER)
30. UDYLITE SEMI-BRIGHT NICKEL PLATING
31. UDYLITE TLA CONCENTRATE (SEMI BRIGHT NICKEL)
32. ELPELYT PEARLBRITE NICKEL
33. NON PITTER 22 SPECIAL
34. LECTRO-NIC 1003A (AIR AGITATED NICKEL SULFATE)
35. UDYLITE NICKEL ADDITIVED D-SPEC
36. UDYLITE 66E CFC-FREE CONCENTRATE (bright nickel )
37. ELPELYT LEVELLER E-10 (SEMI-BRIGHT NICKEL)
Electroless Nickel
38. ENPLATE NI-425 (HIGH-P EN)
39. ENPLATE NI-434 (HIGH-SPEED,BRIGHT EN)
40. ENPLATE NI-422 (SEMI-BRIGHT EN)
41. ENPLATE AL-100(EN FOR AL)
PALLAD PLATING
42. DECOREX NF (DECORATIVE PALLAD)
43. DECOREX II
COPPER PLATING
44. UBAC AUX (UDYLITE BRIGHT ACID CU)
45. UBAC EP (UDYLITE BRIGHT ACID CU)
ALLOY PLATING
46. BRONZEX AF (CU-SN-ZN, YELLOW)
47. BRONZEX II (CU-SN)
48. BRONZEX III (CU-SN,WHITE)
49. ENLOY SNC (SN-CO,BLACK AND GREY)
50. ENLOY SNI (SN-NI)
51. PALLADEX 2600 (PALLAD-NICKEL)
52. PALLADEX 2800 (PALLAD-COLBAT)
ZINC PLATING
53. ENTHOBRITE NCZ DIMENSION (ALKALINE NON-CYANIDE ZINC)
ZINC PASSIVATION
54. ENTHOX 464 (LIQUID GREEN CR CONVERSION)
55. ENTHOX 775 (BLACK CONVERSION COATING FOR ZINC)
56. PERMA PASS 7012 (BLACK TRIVALENT CONVERSION)
57. Perma Pass 3082 (Thick film trivalent passive)
58. Perma Pass 3091 (TRIVALENT BLUE CONVERSION)
59. PERMA PASS IMMUNOX 3-K (TRIVALENT BLUE CONVERSION)
60. PERMA PASS 3080 TRIVALENT BLUE PASSIVATE
61. PERMA PASS 3095 (TRIVALENT YELLOW-IRIDESCENT PASSIVATE)
GOLD PLATING
62. AUTRONEX CI (CO HARDENED GOLD)
63. AUTRONEX CC ( ACID HARDENED GOLD)
64. AUTRONEX CHD (HIGH SPEED GOLD)
65. Aurobond 818 (Neutral Gold)
66. HM-GOLD NO.1 (NEUTRAL GOLD CONUCTING SALT)
67. IMMERSION GOLD I (ELECTROLESS GOLD)
68. KARATCLAD 1N 14 (DECORATIVE GOLD) 23K)
69. KARATCLAD 2N18 (DECORATIVE GOLD) (PALE YELLOW)
70. KARATCLAD 2001 (HIGH SPEED,ACID GOLD)
71. Aurobond TN (Gold Strike)
72. Auroflash 7001(Decorative Gold)
73. Auroflash No.2 (Decorative Gold, Also apply to PWB)
74. IMMERSION GOLD I (NEUTRAL IM-AU FOR CU AND CU ALLOYS)
75. KARATCLAD 3N (DECORATIVE GOLD)
76. KARATCLAD 368S (DECORATE GOLD)
PLATING ON PLASTICS
77. UDIUE 887 DT ACCELERATOR
78. UDIQUE 879W ACTIVATOR
79. UDIQUE 858 HT WETTER
80. UDIQUE 594 (ACID CU STRIKE)
81. ENPLATE PRE-ETCH 817
PWB CHEMICALS
82. CUBATH MHT (HIGH SPEED ACID CU)
83. CUPROSTAR ST-2000 (BRIGHT ACID CU)
84. ENTEK PLUS HT (OSP)
85. ALPHA PREP PC 7030N(BONDING PROMOTER)
86. ENPLATE CU-406 (ELECTROLESS CU)
87. ENPLATE MLB-791 ( NEUTRALIZER ETCH)
88. CIRCUITPREP 2040 (SUPER MIROETCH)
89. CIRCUITPREP 3316 (PALLAD ACTIVATE)
90. ENTHONE AF-1863 FLUX
91. ENTHONE CE2263 FLUX REMOVER
92. ENTHONE PC-1111Z SN STRIPPER
93. ENTHONE PC-4754 DEFOAMER
94. ENTHONE PC-5710 MICRO ETCH
OTHERS
95. ENTHOX AL-990 (CR CONVERSION FOR AL)
96. EVABRITE WS (SILVET ANTI-OXIDANTANT)
97. EVABRITE TPS-AG (SILVET ANTI-OXIDANTANT)
98. EBONL Z (BLACKENING FOR ZINC AND ZINC ALLOYS)
99. EETOREX 62-A (GOLD STRIPPER)
100. ENSTRIP AU-78 (GOLD STRIPPER)
101. GOLD STRIPPER CONC N (GOLD STRIPPER)
102. ENSTRIP EN-86 (ELECTROLESS NICKEL STRIPPER)
103. ENSTRIP S (NICKEL STRIPPER)
104. HAKUREX CS (SILVER STRIPPER,COPPER STRIPPER)
105. UDYSTRIP 424
Sir
please send formula for making brightners[m and r] for acid zinc
thanks
sir, i need gold plating,yellow bronz plating formulation and other deatials plz send me the details
pls suggest ur personel e mail id &phone no for further direct cummnication regarding electroplating,passivation interdediate chemicals.
Dear Sir,
would u like to inform me ur’s intermediate chemicals for the formulation of all type of brightners,additives.surface conditionising,passivitions,higf life sealers over zn plating process as well as to prevent oxidation of silver ,cu plating&also suggest the rate of following chemicals along which application of the intermediate chemical for particular process &how much quatiny requried.for ex———–
intermediatechemical application quantity/ltr rate
propargylalco.propoxylate a.z brigh. 5-8ml rs1700/ltr
PLZ SENDING ME THE COMPLETE CYNIDE ZINC COATING FORMULA
hi please give me the formula of 53/56/61
dear sir…
i need common plating brighteners, nickel, copper, zinc and bronze brightener, please let me know how we can be cooperated, thanks
hello sir,
My suggest is i want to learn more about the plating skill but how probobly you need to send school here in my place tacloban city no schools like that if you have one schools here or if i haired one of your school here i am very interested even though per session or full time session of schooling please go to tacloban city i know there will be more interested of your special learning school.
i highly appreciated your good office and more power.
Thank you.
Anthony
Dear SIR,
I need to know good formoulation of the soak cleaners and electro cleaners of the iron ,brass,die casting ,aluminium.
Best Regards
ghafari
Dear Sir,
I’m interested in electroless nickel mid and high P process.
I think we can corporate more process.
Regards.
Stan
Sir,
We are already doing plating of nickle,brass,and acid zinc.I want to achieve
new colour in coating,how you can help us regarding new colours in plating.
Dear sir;
I need all the Plating Chemistry Formulas with details of each.
Best Regards.
Hi
I need formula 77 and 78. please email me.
thank you
Hello,
I’m interested in the formulas that you are speaking here. How we can do to receive the formulation?Specially PTH and Shadow formulation
Dear sir :
I need enthone defoamer PC-4754 formula or product, please contact with me ~
regards
charlie
Dear Sir,
I need the formula of nickel electroless
Regards
Dear sir,
i’m interest in black convertion for zinc plating, can you send that formula for me, thank you
Hello,
I need acid etch formulation can you send me the price and payment method how should we pay you for the same.
Also i need PTH formulation cost and break for the formulation .
sir i have a plating shop i am intrusted in the formula of making acid zinc M [additive ] & R [britner] & the formula of trivalent passivasion please let me know
Dear Cartomer,
Any one interest to invest in metalfinishing chemical manufacturing?It will be a golden chance to get formulation and know how of the product .
Hello,
I would be interested in the following:
38. ENPLATE NI-425 (HIGH-P EN)
39. ENPLATE NI-434 (HIGH-SPEED,BRIGHT EN)
40. ENPLATE NI-422 (SEMI-BRIGHT EN)
Please e-mail me with your contact information.
Regards,
Sean
sir please give me the formula of M & R&TRIVALENT YELLOW PASSIVSION
I am intetested in high speed electroless nickel on low carbon material.
Hi
i am looking for bronze plating
quote me your prices
waiting reply
thanks
Dear Sir;
I need information about the price of # 54 and #55 formulation and Payment method.
Thanks in advance, best regards.
IHi there
I need information about the price of # 75 formulation and Payment method.
Hello Chris,
I’m doing the industrial plating now, so i’m very interested in all the formulas that you are speaking here. Can I get the formulation and TDS .
Regards
Bruce
Good Morning,
I’m interested to know the conditions (price in euro or dollar) to receive the whole amount of formulas and the price of the only one formula n° 32 pearlbrite nickel.
Then, I would like to know if you will send also detailed information (let us say user’s book) for each product or at least the working parameters and some advice.
Of course also something about the payment method.
Thanks,
Best Regards,
Claudio
Can you recommend a company that can black oxide a stainless steel mens watch body or works with personal jewelry.
Dear sir ,
I need different color plating on precious metal like as Blue, Dark Pink , Green,
Brown, Purple.
Sir i need both color formulation & Which Chemical Use in this formula
please advice me
thanks
i am interest in anti tarnish for improve tin solderability at low temperature reflow (<200 degree c with tin/lead solder paste)
can you inform me which chemical are used in Gold Plating and how many quantity are used.if u have nay video of making gold plating chemical or formula plz inform me in my email address, i m waiting for your positive response
dear Sir,
i am interested in non cyanide gold plating for electronic applications.
please respond.
thanks in advance
sarathy
dear sir,
i need zinc passivations formulations.
1) yellow 2) green 3) blue
Please ,Iam interested in:
cyanide free Zn / Ni alloy bath formulation.
Thanks in advance, best regards.
Hello,
I’m interested in Chemistry Formula’s 106, 98 and 55 to 61.
Regards,
dear sir,
i need zinc passivations formulations.
1) yellow 2) green 3) blue
I am very interested in all your formulations, I am work in one firma química of plating system, the company have bath basic and I need developement news baths electrolytes, if you are interested I would be preciated to start a know how exchange with you. So please respond to my comment, if it is to much send all receipts please tell me I will have a look for the electrolytes which I am the most curious of.
Thanks for the referencia
Atte
Ernesto
Hello,
Pls email to me Plating Chemistry Formula: 13,38,39,44 & 45
Your feedback very much appreciated.
Thanks
I’m interested in the formulas of Bright Nickel Decorative ang Acid ccpper Decorative.
Thanks a lot
I’m interested in the formulas for coloring electroless nickel surface: blue, green, etc… Any ideas about the formula for electroless cobalt plating that should give a gorgeous blue finish? Thank you.
Andy
olive green Formulations
Hi,
People here are so eager and desperate and beg for the formulations above. All people here are cautioned, not to get into any trap, because chemicals for plating should be formulated only by people who are well versed with this art.
Plating chemicals are not simply mixing abc, but controlled reaction of chemicals systematically. One needs to employ safety precautions and lot of specialised equipments and thorough knowledge of raw materials before formulating and that can only be possible when one is very well versed with chemistry.
Any misadventure would lead to uncontrolled explosions and noxios and harmful gasses, and remember that you may not only pay a few bucks for hard worked formulations of companies but may end by paying with your life…So let us leave the formulations with the supplier companies and concentrate on plating..
Regards
Gautam Kumar
I am interesting with all PCB plating process additives, what do you have?
hello
i am interesting for formula for plating gold or brass on zinc alloy.(formula and tretman)
please tell me how much it costs and how can i pay for that.?
regards
Dear Sir,
I’m interested in bright nickel, decoratiove chrome and zincate.
Best regardds.
Stanley
Formulas for long life etching solutions of aluminium
Dear Sir
Very much interested in about formulations. Plz get in touch with me and lets do some business
I’m interested in the formula for this..
ENLOY SNC (SN-CO,BLACK AND GREY)
I am interested in dilute zincate for plating EN on Al
Regards
Zivorad
hello
i require formulation for trivalent yellow and blue passivation on zinc plated components.
please contact
harish
How much the price for each fomula.
i wanna be learn the polishing a gold color on copper and brass metal ornaments i wanna a complete method of this can you give some idea aboth books or video cd,s thank you
hi
I am looking for some formulation to produce palladium activator (your 77 no palladium – tin in hcl ) for plating on plastic and white bronze I, II(Cu-Sn),(Cu-Sn-Zn) and nickel brightener formula. how can i contact you
Regars
Hello
I am interested in #44 , 45 bright Acid cooper proceess especially additives formula .
Regards
plz get me yellow zinc plating
Dear Sir,
I’m interested in following products among your products :
Udyfin 948
Pearlbrite Nickel
ST-2000
Best regards.
Stanley
Hi ,
I have question on the my plating process, if the my coppe stripper in my tank the temperature raise up 50degree celcius above , how to make get cool down
what material to need to use ? or i need drain the copper strip and add new copper strip?.
Please give ur input .
I’m happy to read this site.
Specially, I am interesting to your formulating in electroless nickel and copper.
Best Regads,
i am interested in bright hard gold plating chemichal formula,
will you please advice in details?
Hi,
I am looking for some formulation to produce spray chrome paint,chrome paint,silver coating and some more formulations if possible.Please let me know to have the formulations.
Regards
selcuk
Hi,
i am manufacturer of electroplating additves, looking for best formulations for, acid copper, bright nickel, semi bright nickel, black nickel , electroless nickel, bright and hard chrome, specially cyanide zinc and non cyanide zinc processes, chrome conversion coatings blue, yellow, olive drab, black all trivalent, acid tine plating, plating on aluminium, blackening for m.s low temperature, s.s , zinc, brass and aluminium blackening, brass plating all silver and gold formulations specially hard gold and must must need the formulations for the brighteners of all these processes. i have almost all these processes but want to improve specially if all the formulations are of enthone.
regards,
Moeed
iam intersing in bright tin over nickle plated article pls send the complete procedure and formula best regards
hi
i am distributer and also have electroplating line in zinc (cyanid),nickel,cupper in different line,i know the component of all additive but i dont know exactly amount of additive composed of, if it ok please send me formulation of additives for bright nickek,copper,zinc
best regards
hajilo
Hello
I m interesting in high thickness electroless gold formulation ,
also cyanide type silver brightner
I need some advice for this formulation.
Thanks
Dear Sir.
I would be interested in the BRONZEX different variants formulation.
Do you also have the brighteners composition?
Thanks,
Jean
Hello Chris,
Is there any pre-treatment process for transparent ABS or transparent PP which we could apply on our conventional ABS plating process.
Regards
David
Hello. i very interested to know formulation of nickel disk cleanser?
Can you help me?
Thanks you
i want to do spray on chrome coating and ……………..i know the silver formula bt want to know abt the activator that is your 77 no pladdium with tin and hcl
and what are the price how can i contact you
I will clarify a bit, we want to do:
1) Bright acid copper
2) Birght nickel
3) Decorative chrome
4) Zinc (bright and matte)
5) TIn (bright and matte)
6) Zincate
7) Electroless nickel (bright)
8) Semi-bright nickel
Also, etching for Al, and cleaners, copper stripper, nickel stripper, chrome stripper :)
If you have the formula for plating copper directly on pot metal like Caswell’s Flash Copper, that would be terriffic!
Thanks a lot! Please contact us.
Please let me know if you need the following:
Enthone Product Formula
Pre-treatment
1. Actane 70 (Dry acid salt for pickling and activating metals
2. Actane 345 (Dry acid salt)
3. Actane 380 (Dry acid salt)
4. Actane 382 (Nicke activate for AL wheel)
5. Actane 788 (Dessmut for AL Wheel)
6. Actane 2969 (Nitric Acid conditioner)
7. Actane 4322S (Quality assured mild acidic etch for plating on Aluminum)
8. Actane KT (Activating salt containing fluoride)
9. Enprep 2370 T (soak and ultrasonic cleaner for colored metals and Al alloys)
10. Enprep 1012 (Alkaline degreasing bath for steel and colored metals)
11. Enprep 35 (Non-Si soak cleaner for Al alloys)
12. Enprep 8744 (Non-Si soak cleaner for plating EN on AL)
13. Enprep 142 (Alkaline soak cleaner)
14. ENprep 14 (Non scaling alkaline etch cleaner for AL)
15. Alumon EN (Dilute zincate for plating EN on AL)
16. Udyfin 948 (Zincate solution for AL)
17. UDYPREP 283 (NON-P ALKALINE CLEANER)
18. UDYPREP 261 (CHEMICAL CLEANER FOR STEEL)
19. UDYPREP 101 CHEMICAL CLEANER FOR STEEL)
Chrome Plating
20. Ankor Wetting Agent SRK (Low foam for CR plating)
21. Ankor 1120H (Bright CR plating)
22. Ankor 1127 SR (Hard chromium plating)
23. Ankor NFDS (Activator for Bright Ni)
24. Tricrolyte IV (Trivalent chromium process)
Nickel Plating
25. ELPELYT LS 1(BRIGHT NICKEL)
26. ELPELYT GS 6 (Bright Nickel)
27. ELPELYT SF/PP (BRIGHT NICKEL)
28. ENPLATE INITIATOR 853(NOBLE METAL PRIOR TO EN ON CU)
29. CLASSIC BRIGHT NICKEL (FOR STEEL,BRASS,COPPER)
30. UDYLITE SEMI-BRIGHT NICKEL PLATING
31. UDYLITE TLA CONCENTRATE (SEMI BRIGHT NICKEL)
32. ELPELYT PEARLBRITE NICKEL
33. NON PITTER 22 SPECIAL
34. LECTRO-NIC 1003A (AIR AGITATED NICKEL SULFATE)
35. UDYLITE NICKEL ADDITIVED D-SPEC
36. UDYLITE 66E CFC-FREE CONCENTRATE (bright nickel )
37. ELPELYT LEVELLER E-10 (SEMI-BRIGHT NICKEL)
Electroless Nickel
38. ENPLATE NI-425 (HIGH-P EN)
39. ENPLATE NI-434 (HIGH-SPEED,BRIGHT EN)
40. ENPLATE NI-422 (SEMI-BRIGHT EN)
41. ENPLATE AL-100(EN FOR AL)
PALLAD PLATING
42. DECOREX NF (DECORATIVE PALLAD)
43. DECOREX II
COPPER PLATING
44. UBAC AUX (UDYLITE BRIGHT ACID CU)
45. UBAC EP (UDYLITE BRIGHT ACID CU)
ALLOY PLATING
46. BRONZEX AF (CU-SN-ZN, YELLOW)
47. BRONZEX II (CU-SN)
48. BRONZEX III (CU-SN,WHITE)
49. ENLOY SNC (SN-CO,BLACK AND GREY)
50. ENLOY SNI (SN-NI)
51. PALLADEX 2600 (PALLAD-NICKEL)
52. PALLADEX 2800 (PALLAD-COLBAT)
ZINC PLATING
53. ENTHOBRITE NCZ DIMENSION (ALKALINE NON-CYANIDE ZINC)
ZINC PASSIVATION
54. ENTHOX 464 (LIQUID GREEN CR CONVERSION)
55. ENTHOX 775 (BLACK CONVERSION COATING FOR ZINC)
56. PERMA PASS 7012 (BLACK TRIVALENT CONVERSION)
57. Perma Pass 3082 (Thick film trivalent passive)
58. Perma Pass 3091 (TRIVALENT BLUE CONVERSION)
59. PERMA PASS IMMUNOX 3-K (TRIVALENT BLUE CONVERSION)
60. PERMA PASS 3080 TRIVALENT BLUE PASSIVATE
61. PERMA PASS 3095 (TRIVALENT YELLOW-IRIDESCENT PASSIVATE)
GOLD PLATING
62. AUTRONEX CI (CO HARDENED GOLD)
63. AUTRONEX CC ( ACID HARDENED GOLD)
64. AUTRONEX CHD (HIGH SPEED GOLD)
65. Aurobond 818 (Neutral Gold)
66. HM-GOLD NO.1 (NEUTRAL GOLD CONUCTING SALT)
67. IMMERSION GOLD I (ELECTROLESS GOLD)
68. KARATCLAD 1N 14 (DECORATIVE GOLD) 23K)
69. KARATCLAD 2N18 (DECORATIVE GOLD) (PALE YELLOW)
70. KARATCLAD 2001 (HIGH SPEED,ACID GOLD)
71. Aurobond TN (Gold Strike)
72. Auroflash 7001(Decorative Gold)
73. Auroflash No.2 (Decorative Gold, Also apply to PWB)
74. IMMERSION GOLD I (NEUTRAL IM-AU FOR CU AND CU ALLOYS)
75. KARATCLAD 3N (DECORATIVE GOLD)
76. KARATCLAD 368S (DECORATE GOLD)
PLATING ON PLASTICS
77. UDIUE 887 DT ACCELERATOR
78. UDIQUE 879W ACTIVATOR
79. UDIQUE 858 HT WETTER
80. UDIQUE 594 (ACID CU STRIKE)
81. ENPLATE PRE-ETCH 817
PWB CHEMICALS
82. CUBATH MHT (HIGH SPEED ACID CU)
83. CUPROSTAR ST-2000 (BRIGHT ACID CU)
84. ENTEK PLUS HT (OSP)
85. ALPHA PREP PC 7030N(BONDING PROMOTER)
86. ENPLATE CU-406 (ELECTROLESS CU)
87. ENPLATE MLB-791 ( NEUTRALIZER ETCH)
88. CIRCUITPREP 2040 (SUPER MIROETCH)
89. CIRCUITPREP 3316 (PALLAD ACTIVATE)
90. ENTHONE AF-1863 FLUX
91. ENTHONE CE2263 FLUX REMOVER
92. ENTHONE PC-1111Z SN STRIPPER
93. ENTHONE PC-4754 DEFOAMER
94. ENTHONE PC-5710 MICRO ETCH
OTHERS
95. ENTHOX AL-990 (CR CONVERSION FOR AL)
96. EVABRITE WS (SILVET ANTI-OXIDANTANT)
97. EVABRITE TPS-AG (SILVET ANTI-OXIDANTANT)
98. EBONL Z (BLACKENING FOR ZINC AND ZINC ALLOYS)
99. EETOREX 62-A (GOLD STRIPPER)
100. ENSTRIP AU-78 (GOLD STRIPPER)
101. GOLD STRIPPER CONC N (GOLD STRIPPER)
102. ENSTRIP EN-86 (ELECTROLESS NICKEL STRIPPER)
103. ENSTRIP S (NICKEL STRIPPER)
104. HAKUREX CS (SILVER STRIPPER,COPPER STRIPPER)
105. UDYSTRIP 424
Hi
i am interesting in the mirror type high relative plating on any kind of material.I need some advice for this formulation and it’s process.
Thanks
hello
I want a permanent gold plating formula for fashion jewellery. Colour must stay more than 2 years……………. thanks
i want copper brightener formula.
i want nickel brightener formula.
hi dear
i need a very good zink brightener furmola?
can you help me?
thank you
i am working in electroplating field now i start the own company i will pay the formulation cost please reaply us we have full team of sales and reserch and development team so we hope you will contact us imidiates
Hello
I m interesting in the trivalent blue and yellow passivation formulation .I need some advice for this formulation.
Thanks
I would like to get the formula for passivationin plating. How could we get in touch with you
thanks
Dearv Sir,
I am Seen your words that you are having formulation for Zinc plating I am working in a plating shop as a manager But now. I want to open own plating plant So please do one thing in my favour & giving me all the formulation for zinc plating i.g. Acid zinc & Alkaline zinc. This is my need please sir this is a humble request .I am waiting for your kindness.
Thanks & Regards
Ashok Gupta
Sir
I would like to get the formula for passivationin plating. How could we get in touch with you
sir iam interested in all zinc plating formulas . pl. let us know the cost of the same
Hello…….I’m interested for all the soak cleaner for plating like as alkalin and acidic soak cleaner .
please send to me your best formula for this.
thank you and best regards.
mehdi
i nid chemistry past question
i d like to get some formulas about zinc plating the formula 53 to 61 , how could i in touch with you
Thanks
Cesario Flores
Respected sir i am intrested in all electroplating formulla please send me email
respected,dear sir, I I would like to get me formula for best of iron (ferrus chloride) electroplating.how could we get in touch with you sir.
Dear Sir,
I would like to get the formula for Stripping High Phosphorus Electroless Nickel plating. How could we get in touch with you.
i need hard goldplating 10 and above macrons formola and with out gold goldplating formola
I want to plate copper on float glass to make it copper mirror.please guide me in this matter. thanks
Hi Kevin and everybody else out there,
I could sell you formulas for almost all of the plating processes. My email address is [snip].
Sincerely,
Saile
Your web site is addicting. Enjoyed it. I need to take my aderall before I come again. I’m looking for a bright nickel plating solution, perfererably one where I can make it my self with with off the shelf chemicals. As for brightness, about like a brand new nickel, but not chrome like. Also how much revenue can I make for a site like this… Thanks Kevin
Juli 30th,2010
I am interested in the black trivalent passivation on zinc formula
Hello,
I’m interested for all the plating formulation and soak cleaner.
Thanks,
dindin
I am interested in # 45 Bright acid copper process.
We have need Fast brightner for cobalt plating can you tll me its formula
Dilute zincate for plating EN on AL
Please contact me concerning formulas. I am looking to consult and would like to discuss what you have.
Regards
Hi ! I am interested in the trivalent black passivation on zinc formula
I am interested in the formula u speak of
I am intersting in your formula espeically, chromic acid free etching of polymer, Activator plastic by silver and electroless nickel,trivalent chromium electroplating,non-cyanide copper-tin plating.
kindly send this formulation
BR
I like to know how to remove e-coat (alkaline process), so in this moment we remove by acid process, my customer require by alkaline, would you help me to find the formula??
Thanks in advance
Jorge
HIII…..interesting in your formula Zinc alkaline non cyanide brightener and acid zinc brightener…
kindly send this formulation
best regards
HI jIM
This is Raul Rodriguez from Mexico, I took my early retirement last 2002 however i am still active. Plese be in touch
Regards,
Raul Rodriguez
pleae send me Ni-Palladium, yellow bronz formula
I am intrested in formulas especialy Ni-Palladium, yellow bronz please kindly send this formulation
I am the proprietor of Casman &company that manufactures MIRROR ON FLOAT GLASS. I am now interested in making GOLD PLATING on FLOAT GLASS inorder to manufacture Gold coloured mirror. So, please E-mail me the formula and process to the above address.Thank you.
I am interested in gold, silver & palladium plating chemistry.
Please arrange to furnish me your business terms for the same.
Regards…
I WANTS ALKALINE ZINC BRIGHTNER FARMULA.PLEASE LET ME KNOW THE COST.THANKS AND REGARDS
i’d like to support me about Ni-Co-P and Ni-Co-B electroless and electroplating on aluminium or carbon
HI,
Interested in many formulas especially chrome, nickel plating
Do you have ABS plating formula.
iam intersting in your formula espeically, chromic acid free etching of polymer, Activator plastic by silver and electroless nickel.
kindly send this formulation
best regards
Guys, all this is a big scam, the email originally posted above is lying about all these formulas.. They don’t have any formulas.
Hello,
I’m interested in all your formulas but particulary in zinc/nickel formulas.
Thanks for your help.
Regards
José Oliveira
greetings!
i am interested to know about electroplating specially on black chromium…its chemical formulation. If possible it includes zinc, nickel, alloy and gold. I want to know its composition and formulation. all the information i needed. thank you and more power
Hi,
The above all topics are intrested and I want to know all these formulations.
I am looking for Electroless PCB through hole plating for Printed Circuit Boards. Please contact and reply me in this regard how we can proceed.
MOHAMMAD
I want to know the formula to make own M & R used in zinc electroplating ( acid based )
with regards
kirpal singh
Can you send my email for Zinc plating, Gold plating, Zinc- Nickel. Thank you
Interested in ss pickling solution (HNO3-HF-CH3COOH) without NOx fume emission. Any suggestion?
HI,
Interested in many formulas especially chrome, nickel plating
Do you have ABS plating formula.
Hello sir, I’m from India. i require all of plating chemistry formula information that is displayed here.
Sir, send your address to my mail id so i contact you by mail and telephone
your office in India so send contact person in India
best regards,
ravi shinde
i am interested in your number 23 formula, electrolytic activator for bright ni. please contact me and tell me how i can get sample and tech data, thanks.
Chris,
Interested in several of your technologies. Do you have any Solder Mask technology?
Please let me know,
Thanks,
Mark
Hello sir, I’m from india.i have gone through list of all books and i want to know more .is each of book cotain complete detail how to manufacturer the blackening process of zinc .already we are making here wit chromic acid and silver nitrate etc.
Please qoute the price of book and how we can get that.
Rahul Sachdeva
iam intersting in your formula espeically, chromic acid free etching of polymer, Activator plastic by silver and electroless nickel.
kindly send this formulation
best regards
hello….i need to know the formulation of an acid HNO3-HF based stainless steel pickling solution, that can efficiently reduce down the NOx fume emission. Any additive or suitable surfactant/wetting agent?
Thank you.
Hi i need to know the formulation of acid copper brightener and additives
Hi;i own a gold smith workshop producing gold bangles.i am very much interested in your electroless lemon yellow plating solution formula.i would deeply appreciate your kind assistance.thanks in advance for your time & efforts. with best regards. kaveh
i want formula of lead coating on nut bolt ,copper strips &brass parts
I am very much interested in alkaline zinc (cyanide free ) plating additives formulation . Kindly send these formulations. Thanks in advance.
Majid Homayoon
I am very much interested in white bronze I & II and dry acid salt to activate passive nickel layer. Kindly send these formulations. Thanks in advance.
Hello.
I am very interested in your formulas, especially bright acid copper system (44. Additive for Acid Cu: 45 Bright acid copper process),
I own a factory which produces electroplating additives in South China. I want to cooperate with you eagerly,please let me know how to contact with you.
Thanks a lot
Tony
Hello.
I am very interested in your formulas, especially bright acid copper system (44. Additive for Acid Cu: 45 Bright acid copper process)
Thanks a lot
Tony
Hello,
I am very interested in all your formulations, I am plating shop manager for a european company and have also a lot of modified and self developed electrolytes in use, if you are interested I would be preciated to start a know how exchange with you. So please respond to my comment, if it is to much to send all receipts please tell me I will have a look for the electrolytes which I am the most curious of.
Thanks a lot
Atze
I’m interested in the formulas of white bronze I, II(Cu-Sn),(Cu-Sn-Zn)and trivalent
chromium baths.
Thanks a lot
Byung Ho Ro
I am working and own a factory where I do tinning/nikkel on copper and brass. I have the machine but can’t operate properly because I dont have the formula. I don’t know how many micro or the amount of chemical I need to put. I need information on how much quantity I need to put. Please kindly help me.
i want nutral gold bath for flash plating which given dark yello gold sade….
Hello,
I’m interested in the formulas that you are speaking here. How we can do to receive the formulation?
Specially the Zinc Plating.
Regards
David